Service
HOME > SERVICE > Wire EDM
  • CNC Milling
  • CNC Turning
  • Wire EDM
  • Surface Treatment
  • Rapid Prototypes
  • Wire EDM machines allow us to produce parts that could not be made traditionally. We can produce parts that require a fine finish, a quality edge and close tolerances, when possible, stacking parts gives us the ability to cut production time and cost.


    About the wire EDM process.


    The EDM manufacturing process begins by submerging the part of component into a tank filled with dielectric fluid. The next step is feeding a thin stand of metal wire. Which is held between upper and lower guides, through the submerged part. The guides are typically cnc-controlled and designed to move in the X and Y plane. An electric current is then introduced to generate the sparking and produce the desired cutting or shaping action.


    pic03.jpg


    What are the benefits of using wire EDM machines?


    Wire EDM machining offers an array of important benefits during the manufacturing process. Because it can remove materials without exerting a high amount of cutting force, it is ideally suited for situations requiring low levels of residual stress. This minimizes the risk of damage to the workpiece.


    In addition, this EDM machining process produces an accurate, burr-free surface and edge finish. The workpiece is ready for immediate use with finished parts and components with no post-treatment steps required.


    Many manufacturers choose the wire EDM machining service for the fast turnaround time. This allows you receive the finished workpiece quickly to minimize unproductive downtime. If the cost is primary factor, wire EDM machining offer a more budget.


    Product SHOW
    Here are samples of manufactured products.
    Wire EDM capabilities
    Machining processes

    Wire EDM

    Part length

    Up to 15”

    Part Width

    Up to 23”

    Part Height

    Up to 18”

    Materials (Metals)

    Alloy steels

    Aluminum

    Brass

    Copper

    Stainless steel

    Titanium

    Iron

    Bronze Alloys

    Materials (Plastics)

    ABS

    Nylon

    PEEK

    PTFE

    PMMA

    Tolerances

    +/- 0.005” Typical

    +/- 0.0002” close work

    Specific tolerances evaluated on a per project basis

    File Formats

    AutoCAD

    DXF

    IGES

    JPG OR JPEG

    PDF

    Pro-E or Pro/engineer

    STEP



    Start your project with a free quote

    Contact

    Address:No.18 Jiangpu Road, Shengpu, Suzhou Industrial Park, China

    Phone:+86 (512)62625720

    E-mail:Sales@lisinscience.com

    Copyright © 2018 LISIN Inc. All Rights Reserved. By:Wanhu